Constructional difficulty: Easy if using a low voltage AC output mains adapter.
The prototype power supply board. Only one MTA header has been soldered in although up to seven may be fitted.
The Oakley Compact PSU is a complete power supply project for small modular systems. The board contains onboard heatsinking, power regulation, fusing and power distribution. It generates regulated +15V and -15V power rails. Output current capability is dependant on mains transformer or power adapter but can be up to 1A each rail.
The power supply uses half wave rectification to generate both negative and positive output voltages with a standard AC output mains adapter. We recommend that this power supply be used only with a suitable mains adapter (wallwart or linelump) such as Maplin part number N57AT. This particular mains adapter will allow up to 200mA be drawn from each rail - enough for up to seven Oakley modules*.
It is also possible for greater current capacity, or because of personal preferance, to use a mains transformer with twin or tapped secondaries. The Compact PSU is capable of full wave rectifcation if required.
A component level mains transformer should only be used if you know how to connect high voltage wiring. On no account should this project be powered by a component level mains transformer if you are not familiar with fusing, earthing and safe connection of high voltage equipment.
Various options have been provided for power on switches, fusing, earthing arrangements and types of mains transformers
The power supply uses standard parts throughout and requires only a simple voltmeter to set up. The circuit board takes less than an hour to build.
Various options are available for different types of switching, earthing and power on indication. The strong glass fibre PCB is silkscreened for easy component identification. It uses generous pad sizes and throught plated for easy soldering and wide copper double sided tracks for reliable operation.
Generous heatsinking is provided as well as optional LED indicators for each power rail and flicker free AC input indication.
* Please check module power consumption by consulting the particular module's User Guide. Supply current for each module is different and can vary between 10mA to 60mA.
The circuit board size is 155mm x 81mm. If using the recomended components the maximum height of the module when built is approximately 35mm.
Project Downloads
Compact PSU Builder's Guide and Schematic
Construction Guide Our handy guide to building Oakley DIY projects
Parts Guide Our handy guide to buying parts for Oakley DIY projects
Use 'save as...' button to download and view the file. IE users need to right hand mouse click and then choose 'save as'.
Prices
Compact PSU fully built and tested ........................... 55GBP
Compact PSU issue 1 PCB ...................................... 15GBP
Yamaha PA-20 power supply (UK mains plug) ....... 30GBP
Yamaha PA-20 power inlet socket ........................ 2-50GBP
All other parts can be purchased from you usual electronic component supplier.
See the prices page for ordering information, shipping charges and payment methods.
All prices include VAT at UK rates. Shipping/postage is additional to these prices. See also the FAQ page.
Back to projects page: Projects
Back home