Please e-mail Paul Darlow to place your order:
PCB sales
Please note that most, but not all, Oakley Sound printed circuit boards are now only available through Tony Allgood at Oakley Sound. The individual project webpage should state from whom you should purchase your PCBs and parts.
Order Contact Details
Please e-mail Paul Darlow to place your order:
Or e-mail Paul by clicking here. Please ensure that you have Javascript enabled on your browser to allow this hyperlink to work.
Krisp1 Online webshop for ready made modules and accessories.
Visit Paul's website and shop: www.krisp1.com
Currency Information
The prices given on this website are in United Kingdom pounds sterling, hereafter referred to as GBP. The pound sterling is the currency of the United Kingdom/Great Britain. Typical exchange rates are around 1.5USD = 1GBP and 1.1Euro = 1GBP. Be sure to check locally before you place any order.
Shipping and Handling Charges
UK: 5 GBP
Mainland Europe and Scandinavia: 6 GBP
North America: 7 GBP
Australia and New Zealand: 7 GBPThe rates shown above apply to any PCBs and small parts order only. Larger and heavier items such as ready made modules, pre-populated boards and power supply components may be liable for an additional charge. Please e-mail Paul for more details or use our online webshop here: www.krisp1.com.
You only pay one shipping charge for any one order that only includes PCBs and parts. Please e-mail Paul for prices to other destinations.
Ordering Information
When writing an order please be specific. Write down the exact items you require and the quantities. Please try not to be ambiguous and write just "VCO and parts". This can cause confusion as new parts can be added to the list at any time. Please try to use the exact wording as written in the price schemes.
It is strongly advised that you read the relevant project documentation before you order any parts from me. All documentation is only available as downloadable pdf files at the relevant project page. It is not sent out with the PCBs.
All the designs try to use standard components as much as possible. However, some of the components specified may be difficult to obtain in small quantities in your own country.
All components are new and unused unless otherwise stated.
Please note that all ready made modules are now supplied with Bridechamber front panels.
Payment and General Information
Please note we are not VAT registered. Thus the prices include VAT but non-EC customers cannot claim this money back.
Shipping/postage charges are given at the top of this page.
Payment can be made by various methods:
1) UK cheques, bankers drafts or personal money orders. Please make sure that all forms of payment are written up in pounds sterling. Your bank will be able to sort out the best form of payment to you. Make any cheques/money orders payable to Paul Darlow. Please note that Eurocheques are no longer accepted as UK currency by UK banks.
2) By PayPal. Here you can pay with your credit card once you have set up an account with them. You can pay in pounds sterling directly, although Paypal call it 'GBP'. Please e-mail us to get our Paypal account details.
3) Payment by direct bank-to-bank transfer. Your bank may charge a small amount for this service, and you must agree to pay all transfer fees. However, it is the quickest and safest way to get your payment to Krisp1. Please e-mail to get the bank account details. Don't forget to e-mail again when you have instigated the transfer and include a copy of your order and mailing address.
4) Cash in pounds sterling, Euros, US dollars. This is a high-risk affair, but it suits some people, especially for small orders. We cannot cover for any losses due to using this method of payment. Please do not send any other currencies.
Credit cards cannot be taken directly, only via Paypal. Please e-mail if you have any further queries about payment.
IMPORTANT: Please e-mail your order first, listing the PCBs and/or the exact components you require, so that we can confirm availability and delivery.
Your order is typically shipped five to ten working days from cleared payment. Parts and PCBs are shipped by either first class letter or by small packet airmail.
Registered/recorded mail will cost extra, please inquire for more details.
You are responsible for any import taxes or duty payable within your country. These vary and customers are advised to clarify charges prior to ordering. Goods are always marked merchandise.
Returns Policy and Order Cancellation
Returns Policy on stock items (PCBs and components)
You are entitled to return any PCBs and parts to us should you find any reason not to accept them. You are allowed seven working days from receipt of the goods to inspect your purchases. Should you decide to cancel your order within this time, you will be refunded in full. Notice of cancellation can be given by e-mail or letter. The return postage costs must be paid by you and goods must be returned intact and unused.
Please note that Krisp1, also known as Paul Darlow, trades entirely independently of 'Oakley Sound Systems' or 'Oakley Modular'. No liability is accepted or implied on the similar goods supplied prior to 20th April 2009.
Cancelling Orders
Any order may be cancelled, but will be liable to the terms listed below, at any time starting from the original payment date but prior to shipping.
A full refund will be given on all orders containing PCB(s), and parts. However, we will not be liable for Paypal or any other fees incurred in the setting up of payments.
Reserving boards
E-mail is a fast communication medium and as such it is obvious that any payment made will always follow any order. The time taken between our confirmation of the order and the receiving of the payment made by the customer is called the 'reserve time'. This is usually very short with Paypal, but may take several days if the customer is paying by cheque or bank transfer. During this time the PCBs and parts will be reserved for the customer. That is the boards are held aside and are removed from sale. Up to seven days will be allowed as 'reserve time'. If we do not receive payment after this, the board(s) will be deemed as unsold and put back on sale again.
Please be aware that if board stocks are low, delay in settling payment may mean that the order cannot be completely fulfilled. Krisp1 will not be held responsible for any losses of any kind due to this situation. We will refund any payment sent for any products not deliverable by us, but we will not pay out for any 'transfer fees', Paypal fees or exchange fees that you may have incurred while raising the payment.
Board issues and design upgrades
Board designs may occasionally be upgraded. The boards at issue one may be upgraded to issue two or higher. This will happen for several reasons: If the PCB design has a minor fault. If we change board supplier. If a substantial number of people request a new function that can't be implemented on the existing layout. And any other reason we care to choose. What we will guarantee is that the board you ordered is the one that you get. If supplies run out, then you will be told before you send any money. It is our right to withhold any information pertaining to forthcoming upgrades. We will sell most, if not all, the current issue boards before any information about any new issues are placed on this site. Please understand that it is not our intention to mislead. We have to sell most of any current issue to be able to run this business profitably.
It is also our right to withdraw any item from sale at any time for whatever reason. However, we normally try to indicate shortages on the website and the Oakley Sound forum as soon as possible.
Disclaimer
By using this site, you accept the following. Should you choose not to read this information, this shall be deemed implicit acceptance of these terms and conditions.
It is believed by us, that the designs and literature presented are either original, in the public domain or may be considered common knowledge or based thereon, and do not violate the Copyright of any other party. This cannot be guaranteed however, and we accept no liability for loss or damages that may be imposed upon you by any Court of Law, statutory or other body should it transpire that a similar circuit has been simultaneously or previously designed, published or patented by another party.
Nor shall we be held responsible for the failure of any project described to operate as described, loss or destruction of components or any other loss whether direct or consequential including loss of life or personal injury. It is entirely your responsibility to determine the suitability of any design for the intended purpose.
Without limiting the foregoing, everything on this website is provided to you 'as is' without warranty of any kind, either expressed or implied. If errors are found, please contact us and describe the error (and its consequences) so that corrections may be made.
Furthermore, we will not be held responsible for any damages or loss whether direct or consequential caused by the customer's usage of any goods sold by us.
We reserve the right to alter product specifications at any time without notification in the interests of product development. However, any information pertaining to the specification of the PCBs or projects on this website are believed to be valid at that date indicated at the bottom of the relevant web page.
Note: The words 'us', 'our' and 'we' refer to Krisp1. The word 'you' refers to the user of our services.
Krisp1, 17th June 2010
E-mail Krisp1 by clicking here
Back to the Oakley Sound home page